Zenna Home E35604BN01

To Next Page

Pg 1 of 11

Before You Begin:

Thank you for purchasing this product. Please identify all parts and hardware pieces before you begin.

When laying out parts, place them on a soft surface to prevent scratching.

If any pieces are missing, call our Toll Free Number 1-800-892-3986 between 8:00AM-5:00PM EST Monday

through Friday or contact our website at www.zennahome.com for more information.

Antes de que empiece:

Muchas gracias por comprar este

producto.

Identifique todas las piezas y las piezas de ferretería antes de

comenzar. Al distribuir las piezas, colóquelas sobre una superficie suave para evitar que se rayen.

Si faltaran piezas, llame a nuestro número gratuito 1-800-892-3986 entre las 8:00 a.m.- 5:00 p.m., hora del este,

de lunes a viernes o contáctenos a través de nuestro sitio web en www.zennahome.com para solicitar

mas información.

Avant de commencer :

Merci d’avoir acheté ce produit. Veuillez identifier toutes les pièces et les accessoires de montage avant

de commencer. Lorsque vous déballez les pièces, placez-les sur une surface non rugueuse afin d’éviter les

éraflures.

S’il venait à vous manquer des pièces, appelez notre numéro sans frais 1.800.892.3986 entre 8 h et 17 h (heure

de l’Est des États-Unis), du lundi au vendredi, ou contactez notre site Web à www.zennahome.com pour de

plus amples informations.

1-800-892-3989 IS35650-I20

MCS 6/11/2020

Installation Instructions / Instrucciones de Instalación / Instructions de montage

35604BN / E35604SS / E35604HB / E35604BN01

(Double Curved Rod /

Doble Tubo Curvo / Double Tringle incurvée)

Need help?

Do you have a question about the Zenna Home E35604BN01 and is the answer not in the manual?

This document provides installation instructions and warranty information for the Zenna Home Double Curved Rod, available in models 35604BN, E35604SS, E35604HB, and E35604BN01.

Function Description:

The Zenna Home Double Curved Rod is a shower curtain rod designed to provide additional elbow room and a more spacious feel within a shower or bathtub enclosure. Its double-curved design extends outward from the tub, creating extra space compared to a traditional straight rod. The rod is adjustable to fit various tub opening widths, making it suitable for both 60-inch and 72-inch tub enclosures. It is designed for wall-mounted installation, utilizing mounting brackets that secure the rod to the bathroom wall.

Important Technical Specifications:

Models: 35604BN, E35604SS, E35604HB, E35604BN01
Rod Type: Double Curved Rod (Doble Tubo Curvo / Double Tringle incurvée)
Tube Diameters:
- (A) 1 inch (25.4 mm) Diameter Tube
- (B) 7/8 inch (22 mm) Diameter Tube
Mounting Brackets:
- (C) 1 inch (2.5 cm) Mounting Bracket (for 1-inch diameter tube)
- (D) 7/8 inch (2.2 cm) Mounting Bracket (for 7/8-inch diameter tube)
Tube Plugs:
- (F) 1 inch (2.5 cm) Tube Plug
- (G) 7/8 inch (2.2 cm) Tube Plug
Hardware Included:
- (H) 2 Plastic Rings
- (I) 2 Bracket Screws
- (J) 2 Threaded Sleeves
- (K) 2 Small Allen Wrenches (for bracket screws and threaded sleeves)
- (L) 1 Medium Allen Wrench (for set screws in mounting brackets)
- (M) 4 Mounting Screws
- (N) 4 Drywall Anchors
Tools Needed (Not Included): Drill, level, measuring tape, pencil.
Drill Bit Sizes:
- 1/4 inch (6mm) for drywall anchor installation
- 1/8 inch (3mm) for direct stud installation
Adjustability: Designed for 60-inch (153 cm) and 72-inch (183 cm) tub openings. The depth of installation for the brackets varies based on tub opening width, ranging from 0 inches (0 cm) for 44-60 inch tubs to 2 inches (5 cm) for 72-inch tubs.
Mounting Height: Recommended 65 inches (165.1 cm) above the front of the tub ledge.

Usage Features:

Enhanced Shower Space: The double-curved design provides a more open and spacious showering experience by bowing out from the tub.
Adjustable Width: The rod is designed to accommodate common tub opening widths (60 inches and 72 inches), with specific installation instructions for each.
Secure Wall Mounting: The system uses mounting brackets, screws, and optional drywall anchors for a stable and secure installation.
Easy Assembly: The instructions detail a step-by-step process for assembly, including inserting tube plugs, connecting tubes, and fastening brackets. Allen wrenches are provided for tightening screws.
Leveling Mechanism: Set screws in the mounting brackets allow for leveling the rod assembly after initial installation, ensuring a straight and aesthetically pleasing setup.
End Caps: Decorative end caps (E) snap onto the mounting brackets for a finished look.

Maintenance Features:

NeverRust® Warranty: The product comes with a NeverRust® Guaranteed for Life Warranty, ensuring that the aluminum shower rods, caddies, and accessories will be free from red rust during their lifetime. This warranty covers proper and intended use of the product.
Warranty Claim Process: To obtain warranty service, customers should contact the provided toll-free number (1-800-892-3986 or 302-326-8203) and provide a copy of the receipt showing the retailer name, purchase price, and photographs of the defective product.
Rust-Resistant Material: The use of NeverRust® aluminum is a key maintenance feature, significantly reducing the likelihood of rust formation, which is a common issue with shower rods in humid bathroom environments.
General Care: While not explicitly detailed in the provided excerpts, the rust-resistant nature of the material suggests that routine cleaning with mild soap and water would be sufficient to maintain its appearance and functionality. Avoid abrasive cleaners that could damage the finish.

Installation Notes:

Always identify all parts and hardware before beginning.
Lay out parts on a soft surface to prevent scratching.
Measure the tub opening width accurately to determine bracket placement.
Use a level during installation to ensure proper alignment.
Safety Warning: Before cutting, drilling, or hammering into any wall surface, verify the location of electrical, plumbing, and gas lines to prevent serious injury.
Consult a professional for installation into materials other than drywall or studs.
Ensure the open side of the mounting brackets faces the outside of the tub.
Line up the cut-outs in the tube plugs with the holes in the tubes for correct assembly.
Tighten all set screws to level the rod assembly and ensure the entire structure is secure.