Zenoah G5000 - Table of Contents; By TUV Rheinland Group - TUV Rheinland Intercert Kft. Product Certification; H-1061 Budapest, Paulay Ede U. 52, Hungary

G5000
G
B
GB-3
Contents
1. For Safe Operation ................................................................... 4
2. Explanation of Symbols on the Machine .................................. 6
3. Installing Guide Bar and Saw Chain ......................................... 7
4. Fuel and Chain Oil .................................................................... 8
5. Operating the Engine ............................................................... 9
6. Sawing .................................................................................... 11
7. Maintenance ........................................................................... 12
8. Maintenance of Saw Chain and Guide Bar ............................ 13
9. Troubleshooting Guide ........................................................... 14
10. Disposal .................................................................................. 14
11. Specifications ......................................................................... 15
EC DECLARATION OF CONFORMITY
to Directive 2006/42/EC on machinery and to Directive 2004/108/EC on
electromagnetic compatibility and to the regulations governing transposition
internal control production.
CONFORMS TO THE REQUIREMENTS OF THE MACHINERY DIRECTIVE
(Directive 2006/42/EC) AND TO THE NATIONAL REGULATIONS GOVERNING
ITS TRANSPOSITION ABROAD : AND
THAT IT HAS BEEN ISSUED WITH A CE CERTIFICATE (NO. M3 2992705 01)
by TUV Rheinland Group - TUV Rheinland InterCert kft. Product Certification.
H-1061 Budapest, Paulay Ede u. 52, Hungary
Manufacturer : Husqvarna Zenoah Co., Ltd.
1-9 Minamidai, Kawagoe, Saitama, Japan
DECLARES THAT THE DESIGN OF THE MACHINE DESCRIBED BELOW.
Description : Chain Saw
Model : G5000
Serial no. : 2010 000001 and up
Make : Husqvarna Zenoah
Date :
29 December 2009
Signature :
Kiyoshi Honda
General Manager, Development Center
Authorised representative :
Husqvarna AB
SE-561 82 Huskvarna, Sweden
Person authorised to compile the technical file :
Bengt Frögelius
SE-561 82 Huskvarna, Sweden