Zenoah CHAIN SAW G5200

To Next Page

848C8C93A1 (506)

G5200

CHAIN SAW

June 2005

NOTE :

1. Use KOMATSU ZENOAH genuine parts specified in the parts list for repair and/or replacement.

2. KOMATSU ZENOAH does not warrant the machines, those which have been damaged by the use

of any parts other than those specified by the company.

3. When placing orders of parts for repair and/or replacement, check if the model name and the serial

number are suitable to those specified in the parts list, then use parts number described in the

parts list.

4. The contents described in the parts list may change due to improvement.

5. The parts for the machine shall be supplied within ten (10) years after the machine is discontinued.

[It is possible that some specific parts may be subject to change of their delivery term and list price

within the limit of ten (10) years after the machine is discontinued. And it is also possible that some

parts may be available even after the limit of ten (10) years.]

APPLICABLE SERIAL NUMBERS : 303107 and up

Main Page

Need help?

Do you have a question about the Zenoah CHAIN SAW G5200 and is the answer not in the manual?

Summary

Power Unit Components

Cylinder

The main component for combustion, housing the piston.

Crankcase Assembly

The main body housing internal engine parts.

Piston

Reciprocating component within the cylinder.

Crankshaft Assembly

Converts linear piston motion to rotational power.

Muffler

Reduces exhaust noise from the engine.

Ignition and Starting Systems

Ignition Coil Assembly

Generates high voltage for the spark plug.

Switch Assembly

Controls ignition and starting functions.

Spark Plug

Ignites the fuel-air mixture within the cylinder.

Starter Assembly

Initiates engine rotation for starting.

Handle Assembly Components

Left Handle Assembly

Contains controls and grips on the left side of the handle.

Right Handle Assembly

Main handle structure, often includes throttle controls.

Throttle Lever

Controls the engine speed.

Grip Cover

Provides a comfortable and secure grip.

Chain Catcher

Safety feature to stop a derailed saw chain.

Fueling System Parts

Cylinder Cover

Protective cover for the engine cylinder assembly.

Air Cleaner Assembly

Filters intake air before it enters the engine.

Manifold Assembly

Connects the carburetor to the engine cylinder.

Fuel Pipe Assembly

Delivers fuel from the tank to the carburetor.

Fuel Tank Cap Assembly

Seals the fuel tank opening.

Oil System and Clutch Components

Oil Pump Assembly

Lubricates the saw chain and guide bar.

Oil Filter

Cleans the lubricating oil before circulation.

Clutch Assembly

Engages and disengages power to the saw chain.

Clutch Drum

Driven component of the clutch mechanism.

Carburetor System

Carburetor Assembly

Mixes fuel and air for optimal engine combustion.

Diaphragm and Pump

Key components responsible for fuel delivery.

Throttle Valve

Regulates airflow into the carburetor.

Choke Shaft

Controls air intake for cold engine starts.

Breaking System Components

Chain Cover Assembly

Protects the saw chain and drive sprocket.

Brake Lever Assembly

Activates the chain brake mechanism for safety.

Brake Band

Engages the chain brake to stop chain movement.

Guide Bar, Saw Chain, and Tools

Guide Bar

Supports and guides the saw chain during cutting.

Saw Chain

The cutting element of the chainsaw.

Tool Set

Includes essential tools for maintenance and adjustments.

Fuel Tank Assembly

Stores the fuel required for engine operation.

Oil Tank Assembly

Stores the oil for automatic chain lubrication.