IMPORTANCE
Assembly and Fit
Correct assembly and fit are essential elements of ensuring your bicycling safety,
performance, and comfort. Even if you have the experience, skill, and tools to
complete these essential steps before your first ride, ZENROLL recommends
having a certified, reputable bike mechanic check your work.
Mandatory Equipment and Use Locations
Before all rides, ensure you have all required and recommended safety equipment
and are following all laws pertaining to using an electric bike in your region. For
example, these laws may specify the need for mandatory equipment, use of hand
signals, and where you can ride.
Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the safety of
your e-bike, invalidate your warranty and, in some cases, cause your e-bike to not
conform with laws pertaining to your bike. The replacement of original
components or installation of third-party accessories or accessories from
ZENROLL not explicitly recommended for your bike model is at your own risk.
Using aftermarket accessories or components may void your warranty, create an
unsafe riding condition, damage to property or your e-bike, or result in serious
injury or death.
Safety Check Before Each Ride
Always check the condition of your bike before you ride in addition to having
regular maintenance performed. If you are unsure of how to conduct a complete
check of the condition of your bike before every ride, you should consult a
certified, reputable bike mechanic for assistance.
Electrical System
The electrical system on your e-bike offers various levels of power assistance and
lighting for different operating conditions and user preferences. It is critical that
you familiarize yourself with all aspects of your e-bike’s electrical system and
check to see that it is working correctly before every ride. The front and rear brake
levers contain safety power cutoff switches, which disable the hub motor’s
assistance when applied. Both levers should be checked for correct operation.
Brakes
Ensure brakes are working correctly, all braking system components are free from
damage, and properly secured. When you fully squeeze the brake levers, ensure
neither the front nor rear brake levers touch the handlebar. Take your bike to a
certified, reputable bike mechanic to have the brakes repaired if you find a
problem.
To Next Page
Loading...