786-93885 2 of 14 6/6/22
SHIPPING INFO
Unpacking and Inspection
You should inspect your equipment for possible shipping damage. Note any damage on the BOL at
time of signing.
Thoroughly check the equipment for any damage that might have occurred in transit, such as broken or
loose wiring and components, loose hardware, and mounting screws, etc.
Contact the seller for further instructions.
INTRODUCTION
The Zep Dyna-Clean is a heavy-duty, industrial, and stable parts washers for cleaning with solvent-
based cleaners. An ideal choice for fast, efficient and economical cleaning of dirty or greasy parts. The
Zep Dyna-Clean meets or exceeds the OTC Freeboard Specifications.
Standard Features:
• Abrasive-resistant 170 GPH pump
• Reusable nylon filter sock removes large particles of dirt and grime from fluid to extend working
life
• Flexible Stay-Put plastic flush hose for directable hands-free flushing action
• Metal drain strainer prevents small parts from falling into cleaning solution tank
• 16-gauge minimum welded steel tank leak tested for 24 hours after welding with powder-coat
finish for durability and long-life
• Fusible safety link closes lid in event of fire
• Lift-off sink for easy setup and maintenance, fast cleanup and fluid changes
• Freeboard compliant
To Next Page
Loading...