ZEP Dyna-Clean - SPECIFICATIONS AND DIMENSIONS

786-93885 5 of 14 6/6/22
SPECIFICATIONS AND DIMENSIONS
The Zep Dyna-Clean parts cleaner operates at 115V. To determine the electrical requirements of your
model, check the nameplate located on the side of the sink near the receptacle.
The Zep Dyna-Clean is designed to be used with combustible (flash point over 104°F) petroleum-based
cleaning fluids such as Zep Dyna 143, Dyna 170, Dyna Zone Defense, Dyna 680-T2, or Dyna 5202.
A
B
C
D
E
F
G
H min
H max
38.2"
27.2"
63.3"
30.6"
21.8"
9"
38.8"
10 gallons
20 gallons