EasyManuals Logo

Zephyr Essentials ZAN-E30CS User Manual

Zephyr Essentials ZAN-E30CS
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
16
www.zephyronline.com
SURFACE MAINTENANCE:
Do not use corrosive detergents, abrasive detergents or oven cleaners.
Do not use any product containing chlorine bleach or any product containing chloride.
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
Clean periodically with warm soapy water and clean cotton cloth or micro ber cloth. Always rub in the
direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser detergent.
After cleaning use a non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless luster
and grain. Always scrub lightly, with clean cotton cloth or micro ber cloth and buff in the direction of the
stainless steel grain.
Cleaning Black Stainless Steel
Clean periodically with warm soapy water and clean cotton cloth or micro ber cloth. To remove heavier
grease build up use a liquid degreaser detergent.
Due to a built-in layer of protective anti-smudge coating, do not use stainless steel polish/cleaners to buff
out black stainless steel.
Aluminum Mesh Filters
The aluminum mesh lters installed by the factory are intended to lter out residue and grease from
cooking. They need not be replaced on a regular basis but are required to be kept clean.
Remove and clean by hand or in dishwasher on low heat. Spray degreasing detergent and leave to soak if
heavily soiled.
Dry lters and re-install before using hood.
Removing Aluminum Mesh Filters
1. Pull down on lter latch to release lter tabs
2. Pull down on front of lter to remove
Maintenance – Hood and Filter Cleaning

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zephyr Essentials ZAN-E30CS and is the answer not in the manual?

Zephyr Essentials ZAN-E30CS Specifications

General IconGeneral
Colorstainless steel
Hood Typewall
Venting Typeconvertible
Temperature Sensorno
Number of Fan Speeds5
Control Typebutton
Delay Startyes
Interior Lightyes
Remote Controlno
Voltage120 volts
Current4 amperes
Weight and Dimensions IconWeight and Dimensions
Depth22 1/16 inches
Height27 inches
Width29 15/16 inches
Net Weight36.2 pounds

Related product manuals