Zephyr PRB24C01AS-OD User Manual

23
PRB24C01AS-OD Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Operating Your Appliance
If the unit is unplugged, power lost, or turned o, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.
Using the Control Panel
This outdoor beverage cooler has a temperature range from 34ºF-50ºF.
R
C
F
F
C
Power Button
Press and hold this button for three seconds to power your unit on or o. While the unit is on,
the R “Compressor Running” light may illuminate to indicate the internal compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 50ºF is the highest
available temperature on this unit.
Decrease Temperature
Press this button to increase the temperature by one (1) degree increments. 34ºF is the lowest
available temperature on this unit.
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time to switch the display
temperature.
NOTE: The outdoor beverage cooler is equipped with a temperature memory function. If power is
suddenly lost, the previous set temperature will be saved, and the cooler will return to this
setting once power is restored.

Zephyr PRB24C01AS-OD Specifications

General

Brand	Zephyr
Model	PRB24C01AS-OD
Category	Accessories
Language	English