EasyManuals Logo
Home>Zephyr>Accessories>PRB24C01BG

Zephyr PRB24C01BG User Manual

Zephyr PRB24C01BG
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
PRB24C01BG Use, Care, and Installation Guide
ZEPHYRONLINE.COM
Installation Instructions
To prevent damaging the door or door gasket, make sure the door is open at least 90-degrees
when pulling shelves out of the rail compartment.
The door opens to a maximum of 135 degrees with a door stop on the bottom hinge preventing the
door from opening further.
Removing the Wooden Shelves
1. Open the door completely.
2. Remove all of the contents loaded on the shelf, if applicable.
3. Pull the shelf towards yourself until it is fully extended outward.
4. The shelf has plastic tabs on both sides indicated in the diagram below. While facing the unit,
press the plastic tab on the right side down while pulling up on the left plastic tab.
5. Evenly pull out the shelf from the track until it is completely removed from the inner compartment.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zephyr PRB24C01BG and is the answer not in the manual?

Zephyr PRB24C01BG Specifications

General IconGeneral
BrandZephyr
ModelPRB24C01BG
CategoryAccessories
LanguageEnglish

Related product manuals