47
127 128
5. Rear Cleats (Part #CA06.5): Tape the shorter template to the cleat, centering it along the length
of the wood.
129
Poke two holes in one side of each Rear Cleat.
130
129 130
6. Front Cleats (Part #CA06.6): Fold the longer template along its length and wrap it around one of
the longer cleats.
131
Tape down the template.
132
Mark the holes on two sides.
133
Do you see in
the photos where the template is labeled “IN” and “TOP”? Peel back the template and write
those words on the wood.
134
131 132
133 134
To Next Page
Loading...