68
9. Apply a second coat of Wipe-On Poly to the exterior. Ignore the interior; it’s done. Allow to dry
thoroughly.
222
222
10. At this point, if the box is beautiful and satiny-smooth, you are done. If it is still a little fuzzy or
uneven, sand very lightly with 320 grit sandpaper and apply a third light coat. Allow to dry
thoroughly.
That’s it! Look at that gorgeous thing you made! You’re some kind of genius.
223
223
ASSEMBLING THE CABINET
1. Stand the cabinet on its top and install the four little feet (Part # FT03) with four little sheet metal
screws #6x5/8” (Part # SC66. Do not over-tighten.
224
224
To Next Page
Loading...