EasyManua.ls Logo

Zepter AqueenaPro WT-100 - RO Membrane Replacement Time

Zepter AqueenaPro WT-100
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
20
Filter type
Max. recommended fi lter
replacement cycle (months)
WT-100-72 5-micron PP fi lter
6
WT-100-73 Pellet carbon fi lter
6
WT-100-74 1-micron PP fi lter
6
WT-100-75 Coconut fi lter
12
Membrane
Max. recommended fi lter
replacement cycle (months)
WT-100-15 RO membrane
12
RO Membrane Replacement Time
The manufacturer recommends changing the RO membrane WT-100-15 with the Coconut fi lter WT-
100-75; therefore refer to Coconut fi lter replacement period as shown on the Filter Status Display
(No. 5)
Tips!
If you are unsure about the right time for changing your fi lter,
Is the TDS level signifi cantly higher than at the beginning of the purifi cation
process? (Please refer to your record in the Warranty Card).
Does it take longer to completely fi ll the water tank compared to the beginning
of the purifi cation process?
Is the amount of waste water greater than at the beginning of the purifi cation process?
If you have answered YES to at least one of these 3 questions, please change your fi lter(s).

Table of Contents