EasyManua.ls Logo

Zepter AqueenaPro WT-100 - Technical Information; Operating Information

Zepter AqueenaPro WT-100
280 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
21
General Operating Information Value Unit
Rated Capacity* <378 [L/day]
Min-Max Feed Water Pressure
0.69MPa - 0.75MPa
10-110
[MPa]
[psi]
Min-Max Feed Water Temperature 5-38 [°C]
Product Recovery Rate** 42 [%]
Maximum Feed Water Hardness <1000 [mg/L]
Maximum Feed Water TDS <2000 [ppm]
Maximum Feed Water Dissolved Iron <2 [mg/L]
Suitable Feed Water pH 6-8 [-]
Turbidity <3 [NTU]
* at 5 bar feed water pressure and 25° C feed water temperature
** at 3.5 bar feed water pressure and 25° C feed water temperature; TDS <750ppm.
Measured with closed tank
TECHNICAL INFORMATION
PRODUCT NAME: ZEPTER AQUEENAPRO
Model
WT-100
Voltage
AC100-240V, 50-60HZ
Power Rating
25W
Size (mm)
408wx265dx420h
Suitable Inlet Water Pressure
0.07-0.75MPa
Operating Pressure
0.6MPa-0.8MPa
Inlet Water Temperature
5-38°C
Maximum Inlet Water TDS Value
< 2000 PPM
Maximum Daily Water Production Volume
100 Gallons, approximately 378.5 Litres
Self-fl ushing system
YES
Electric Shock Protection Type
Type II
Tank Capacity
9.5 l (usable capacity 6 l)
2.5 Gallons (usable capacity 1.6G)
Suitable Water Quality
Primly designed for municipal tap water.
Country of Origin
China
OPERATING INFORMATION

Table of Contents