EN
7
• Do not disassemble
or modify AqueenaPro
on your own!
Never attempt to repair or change
any internal part of AqueenaPro,
as it may compromise the effi ciency
and safe operation of your water
purifi er. Any unauthorised change
will automatically void the warranty.
If you fi nd that a repair is needed,
please contact your Zepter service
technician for support.
• Do not use AqueenaPro
under high water pressure!
Operating under high pressure
conditions may result in rupture of the
water purifi er pipes and a consequent
water leakage. Recommended inlet
pressure is 0.1MPa to 0.35MPa.
(14.5 - 50.8 psi).
• Do not use AqueenaPro
near gas, naked fl ames,
explosive or highly
fl ammable materials.
Do not leave the water purifi er near
fi replaces or other high temperature
heat sources (stove, oven), as it can
result in deformation or melting of
the housing.
To Next Page
Loading...