To renumber or remove a universe from one of the four protocols,
simply press the universe and either enter the new number, or click
“Remove”.
All FLX range consoles, have a pair of DMX outputs on the rear of the console. Therefore the "DMX" field for a Desk
Universe will only ever be output number 1 or 2.
When a DMX output is added to a universe, it will have the the option in enable or disable RigSync on that output. This
allows the same Desk Universe to be output from both DMX Outputs, but one with and one without RDM.
If you add a protocol universe to a desk universe, which is already in
use by another desk universe, you will receive a popup with the option
to Cancel, or Use on this Desk Universe instead.
Each sACN Universe has the option to set a custom priority. To
change this priority, or change it back to follow the default, simply
press the priority and either enter the new number, or click “Default”.
Devices
The Devices tab displays settings for any devices connected to the
console which can be remotely configured.
Click on the following Devices to find out more...
Tracking Backup
Art-Net Devices
Enttec USB to DMX Devices
Remote Apps
Remote Apps
Zero 88 - ZerOS - Page 183 of 233 Printed: 23/11/2020 12:50:03 JH
To Next Page
Loading...
Need help?
General
