Setting up the Air Vent
The air vent should be as near to the floor as possible, but below the halfway distance of the
total distance to the ceiling.
The exhaust flue should be to the outside of the room and properly sealed to prevent exhaust
fumes entering to the inside.
The bend to the outside will not be less than 250mm from the centre of the flue to the gas
water heater connection.
Precautions
As a precaution, if you are away from home and the gas water heater will not be used for some
time, CLOSE THE CYLINDER VALVE. Always close the cylinder valve first before changing the
empty cylinder with a full cylinder.
To Next Page
Loading...
