EasyManua.ls Logo

Zero Appliances JSD 40-LN1 - Operation and Maintenance; Temperature Control Adjustment; Shut-Off Procedures

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Temperature Control
To adjust;
Use clearly marked controls on the gas water heater control panel. You can adjust the flame
from low to high as well as the required water flow.
Should the water flow be too high, close the valve at the cold-water inlet slightly.
Shut-Off
The gas water heater will shut off automatically when you close the warm water supply. It will
also shut off if you close the cold water supply to the gas water heater, or if you close the
cylinder valve.
This gas water heater MUST NOT be used for anything other than the heating of water.
NB The gas water heater should not be used continuously for periods longer than 20 minutes
at a time.

Related product manuals