Refitting the front cover is reversal of the removal
process.
Refit the touchpad panel and power supply panel.
Refit the decals for the touchpad and power
supply.
Insert all wire terminals into their correct position.
Flip the front cover back over the fridge cabinet as
shown. Fasten the front cover to the body of the
fridge using all screws.
Refit the corner columns as described in Section
9.2.
CAUTION: When refitting cover, ensure that all
cables are securely fastened away
from sharp, moving or hot
surfaces.
To Next Page
Loading...
Need help?
General