Section 2. Specifications
2-2
ADDITIONAL SPECIFICATIONS
Indicators Phone, Carrier, Transmit, Power
Switch Connect / Disconnect
Station ID Morse Code, fixed 1200 Hz frequency and selectable
call sign
Prompt Tones Progress tones, error tones, and warning tones sent to
phone or mobile
Programming Programmable via DTMF phone, DTMF mobile
Data Retention EEPROM - data retention for more than 40 years
without power
Secondary
Protection
Telco high voltage clamps with protective fusing
elements
PAGING FORMATS
DTMF Format Pages consist of from 1 to 8 digits entered by the
caller, plus 0 to 5 additional digits that may be
strapped in the patch’s programming.
Strapped digits can be sent before or after the digits
entered by the caller.
Transmission speed is fixed at 8 digits per second.
Two-Tone Supports both a 100 call and a 1000 call
configuration.
In 100 call, the tone groups available are: Motorola 1,
2, 3, 4, 5, 6, A, B, Z, 10, 11 — GE A, B, C
Eight common two-tone timings are available (see
“Two-Tone Timing” in Section 4).
To Next Page
Loading...