Zeus Arc - Wear & Tear Parts

EN | 21
WEAR & TEAR PARTS
The Heat Sink S consists of two components, the core of
the Heat Sink S and the Heat Sink Cover S . The core of
the Heat Sink S is made from the inert ceramic zirconia.
ZrO
2
(zirconia) exhibits extreme chemical and thermal
stability, which is ideal for its intended purpose. The Heat
Sink Cover S consists of stainless steel; signs of wear do
not affect the function of the component.
The Mouthpiece GTS is made from 2 medical grade poly-
mers, silicone in conjunction with medical grade PPSU, a
high-performance polymer, which is exceptionally stable
against heat, oxidation and hydrolysis. Silicone rubber
and PPSU are inert and therefore do not alter the con-
stituents of your plant material. Both polymers exhibit
high chemical and thermal stability, which means that the
Mouthpiece GTS will last a long time without degrading.
The high elasticity of silicone facilitates straightforward
handling, attachment and removal of the Mouthpiece GTS .
It should be noted that silicone absorbs liquids and swells
when soaked during cleaning. If the swelled Mouthpiece
GTS does not fit on the device, simply let it dry for a few
days until the liquid has evaporated and it returns to its
original volume.
The Heat Sink S is not offered as a spare part. If a re-
placement of the Mouthpiece GTS or Heat Sink S is re-
quired, the Mouthpiece GTS and the Heat Sink S can be
purchased as spare parts, which should be used with the
Screen GT .