To Next PageTo Next Page
Need help?Do you have a question about the Zibro Hybrid E and is the answer not in the manual?
Provides general instructions for using the heater and its accessories, including manual fuel pump.
Details about the manual fuel pump accessory, specifying its EAN code.
Heater is known for being silent due to self-regulatory fan speed, reducing noise and power consumption.
Combines electric and paraffin heating for higher output, capable of heating large spaces up to 160 m³.
Features a 2-step PTC electric element for immediate heating capacity, quickly reaching desired room temperature.
Allows users to select operation mode: paraffin (fuel), electric, or hybrid (auto mode).
Electric heating element maintains room temperature when fuel tank is empty, depending on room load.
Equipped with a self-regulating temperature control system, allowing heating mode adjustment.
Includes a 24-hour programmable timer and integrated thermostatic control for maintaining room temperature.
Provides clean and economical heating without the need for wick maintenance or replacement.
Automatically cleans the burner chamber for 5 minutes after two hours of continuous maximum burning.
Assists users in tracking all the important functions and operations of the heater.
Incorporates a combustion quality sensor, overheat protector, tip-over switch, and burner thermistor.
Features an automatic shut-off system after approximately 65 hours of continuous operation.
The 'SAVE' function helps maintain set temperature, potentially saving up to 8% on energy consumption.
A function that locks all buttons except the on/off button, preventing accidental changes.
A redesigned fuel tank cap for easier unscrewing without direct contact with the tank.
Provides 10% extra heating capacity for 5 minutes during cold starts for faster room heating.
Informs users about ventilation needs and switches off if the room is poorly ventilated.
General