Zibro Laser - General Directions for Use; Main Components

GENERAL DIRECTIONS FOR USE
Below you will find the main steps to be taken for
using your Zibro Kamin. For more details, please refer
to the MANUAL (pages 35 ff.).
• The first time you ignite your heater it will smell
like ’new’ for a short time.
• Store your fuel in a cool and dark place.
• Fuel has a limited shelf life. Start every heating
season with new fuel.
• The right quality of fuel will be assured, when
you use Zibro Plus for your heater.
• If you change to another brand and/or type of
parrafin oil, you must first finish up all the
remaining fuel in the heater.
MAIN COMPONENTS
Front plate
Grid
Base plate
Lid for removable
tank
Operation panel
Handle
Removable tank
Air filter
Vent filter
Thermostat
Plummet (level)
Plug + cord
Information display
ON/OFF key
Childproof lock
Adjustment keys
(time and
temperature)
Timer
SAVE key
Indicator lights
A
B
C
4
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
E E E E E E E E E E E E E E E E E E E E E E E
Remove all packaging materials (refer to Section A, Fig. A).
Fill the removable tank 7 (refer to Section B, Fig. D).
Insert the plug into the wall-socket.
Ignite the heater using the ON/OFF key
N (refer to Section D).
If required, change the temperature using the adjustment keys
(refer to Section E).
Switch off the heater by pressing the ON/OFF N key.
1
2
3
4
5
6
4
23