Need help?Do you have a question about the Zibro Laser FF 95 and is the answer not in the manual?
Details the requirement for Class C1 paraffin fuel and its benefits for clean burning.
Lists crucial safety precautions for operating the heater, including clearances and placement.
Outlines the necessary electrical protection and wiring standards for safe and compliant heater installation.
Details requirements for external fuel tanks, including pressure and height considerations for safe fuel supply.
Illustrates required clearances around the heater and exhaust pipe for safety and proper ventilation.
Guides on using the template and drilling the exhaust pipe hole with correct gradient for water drainage.
Lists final checks for connections, clearances, and leveling before the heater's initial ignition.
A comprehensive checklist to ensure all installation steps and safety requirements are met before operation.
Identifies and explains the function of each button, display, and indicator light on the heater's control panel.
Step-by-step instructions for switching on the heater, including the pre-heating and startup sequence.
Lists error codes displayed by the heater and the recommended actions to resolve each specific error.
General| Model | Zibro Laser FF 95 |
|---|---|
| Fuel Type | Kerosene |
| Tank Capacity (l) | 7.6 |
| Weight (kg) | 12.5 |
| Timer | Yes |
| Thermostat | Yes |
| Ignition | Automatic |
| Fuel Consumption (l/h) | 0.15 - 0.50 |
| Dimensions (w x d x h) (mm) | 330 x 330 x 530 |
| Safety System | Overheat protection |
| Fuel Consumption | 0.25 - 0.35 l/h |
| Dimensions | 330 x 330 x 530 mm |
| Safety Features | Overheat protection |
To Next Page