ERROR CODE INFORMATION WHAT TO DO
E-0 Power interrupted. Re-ignite the heater
E-2 Ignition safety feature is activated. Contact your dealer
E-6 Extinguished during operation. Contact your dealer
E-8 Blower motor malfunction. Contact your dealer
E-12 Overheating safety feature is activated. Clean the air filter and
remove dust.
E-13 Burner thermistor malfunction Contact your dealer
Excess fuel in the burner Contact your dealer
E-22 Ignition failure three times Contact your dealer
-- : -- No fuel. Refill removable tank.
Timer is not setting. Set the timer.
Hi Room temperature is higher than 35°C. Check the position of room
Position of room temperature sensor is temperature sensor.
not correct.
Lo Room temperature is lower than -10°C. Check the position of room
Room thermistor malfunction or temperature sensor.
disconnected.
47
Chapter 3, ERROR MESSAGES
To Next Page