ZiLOG System 8000 User Manual

USER
25
NEXT
Syntax
NEXT [<n>]
Description
Zilog
USER
The NEXT command causes the execution of the next n machine
instructions, starting at the current PC, and displays all
registers after executing each instruction. «n> is in the
range %l-%FFFF.) If <n> is not given, 1 is assumed.
GO
Syntax
GO
Description
This command causes a branch to the current PC, continuing
program execution from the location where it was last inter-
rupted. All registers and the FCW are restored before
branching.
Syntax
JUl1P <address>
Description
The JUMP command branches unconditionally to the given even
address. All registers and the FCW are restored before
branching.
Example
Execute user program starting at %5000.
<J:l!l1£.5..Q..Q.Q. (CR)
FILL
Syntax
FILL <addressl> <address2> <word data>
Description
The FILL command stores the given data word in a memory
location, from addressl to address2. The command address
must be an even hex number.
Example
Store data FFFF in memory from %5400 to %5410.
<~ ~ ~ ££ff (CR)
Zilog
25

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English