Electric Dermatome Instruction Manual
INDICATIONS FOR USE
The Zimmer® Electric Dermatome is a skin grafting instrument that is intended to provide variable graft
thickness and width capabilities.
DESCRIPTION
The Zimmer Electric Dermatome (See Fig. 1) is an electrically-powered surgical skin grafting instrument.
The thickness control adjustment ranges from 0 to 0.030 in. (0.75 mm) in 0.002 in. (0.050 mm)
increments. Individual graft widths of 1 in., 1.5 in., 2 in., 3 in. and 4 in. (2.5 cm, 3.8 cm, 5.1 cm, 7.6 cm,
10.2 cm) are obtained with five width plates. Two stainless steel machine screws secure the plates to the
underside of the instrument. The plates are easily fastened and removed with the screwdriver provided.
The dermatome is powered by an ironless rotor, low inertia motor, which provides nearly vibration-free
power.
SPECIFICATIONS
I. POWER SUPPLY
I. Physical: Weight: 2.6 lb. (1.18 kg); Length: 9.12 in. (23.2 cm); Height: 5.44 in. (13.8 cm);
Width: 6.69 in. (17.0 cm)
II. Electrical: Power Requirements: 100–240 V~ (Auto Switching; 150 VA, 50/60 Hz; Single
Phase; Power Output: 14.5 V , 4.3 A Maximum ; Protection Class: Class 1; Degree of Protection Against
Electrical Shock: Type BF
II. HANDPIECE
I. Physical: Weight: 2.1 lb. (.95 kg); Width: 8.5 in. (21.6 cm); Length: 5.2 in. (13.2 cm); Vibration and
Shock: Standard Commercial Practice; Nominal Speed: 4,500–5,500 cycles/minute
II. Electrical: Power Requirements: 14.5 V , Fully Regulated and Isolated, 4.3 A Maximum
III. Operational: Nominal Speed: 4,500–5,500 cycles/Minute
UL 60601-1 Classification:
Type of protection against electric shock:
Degree of protection against electric shock:
Classification according to the degree of protection against ingress of water:
Maximum operating ambient:
Emissions / Immunity:
The Electric Dermatome complies with EMC criteria set forth in EN 60601-1-2.
To Next Page
Need help?
General
