To Next PageTo Next PageWhat to do if Zip Hydroboil Plus 7.5 Litre White HP007 fails to dispense water?
If your Zip Water Heater fails to dispense water, first check the water supply valve to ensure it is turned on. The issue might also be due to a blocked filter, meter tube, strainer, jammed ball valve assembly, or an airlock in the transfer tube. For further assistance, it is recommended to contact a Zip authorized agent.
Why is my Zip Hydroboil Plus 7.5 Litre White HP007 not boiling?
If your Zip Water Heater is not boiling water, first check the power supply to ensure it is properly connected. The issue could also be due to a faulty PCB, NTC, element, or cutout. For further assistance, it is recommended to contact a Zip authorized agent.
General| Brand | Zip |
|---|---|
| Model | Hydroboil Plus 7.5 Litre White HP007 |
| Category | Water Heater |
| Language | English |
Positioning the heater for optimal service access and tap drainage.
Instructions for physically mounting the heater chassis to the wall.
Details for plumbing, venting, and electrical connections.
Connecting the cold water inlet and ensuring proper pressure.
Plumbing the vent outlet to a safe visible location.
Connecting the power cable for concealed or exposed wiring.
Securing the heater case back onto the chassis.
Filling the unit, checking for leaks, and turning on the power.
Instructions for using the safety tap for dispensing hot water.
Details on normal and continuous operation modes for dispensing water.
Details on how the LCD displays in normal operation mode.
Instructions for setting the water temperature setpoint.
Instructions for setting the 24-hour clock.
Instructions for setting the current day of the week.
Instructions for setting or resetting the filter expiration time.
Configuring the sleep mode for energy saving.
Enabling the low light sensor for automatic energy saving.
Setting the ON time for Sunday operation.
Setting the OFF time for Sunday operation.
