Zip Aquapoint III AP3/10 - User Manual

AP3/10, AP3/15 Installation Instructions 3
Contents
Specification 3
Dimensions 3
Special Notices 4
Installation
Requirements 5
Positioning 6
Plumbing 6
Electrical 6
Commissioning 7
Maintenance
Precautions 8
Schedule 8
Fault Finding 9
De-Installation 9
Warranty 10
Installation must only be undertaken by a
competent person, familiar with unvented
electric water heaters.
The Zip Aquapoint must be installed in
accordance with these instructions and all
current legislation, codes of practice and
regulations governing the installation of
unvented hot water cylinders in force at
the time of installation.

Zip Aquapoint III AP3/10 Specifications

General

Capacity	10 liters
Power Rating	3kW
Thermostat	Adjustable
Wattage	3000 W
Heater Type	Electric
Frequency	50 Hz
Approvals	BEAB
Voltage	230 V
Water Pressure	0.2 MPa - 0.6 MPa (2 - 6 bar)