What to do if my Zip Aquapoint AP4100S SmartEco Water Heater shows error E44?
If your Zip Water Heater displays the E44 error, it means the heater needs to be filled with water. You can resolve this by filling the heater with water. The error can be cleared by switching off the heater or by holding button 2 for 3 seconds.
What to do if my Zip Aquapoint AP4100S SmartEco Water Heater displays error E5?
If your Zip Water Heater displays the E5 error, it should automatically clear once the temperature drops below the set value. However, if the error persists, it is recommended to call the service company.
Identifies hazardous situations and potential property damage.
Details on connecting the heater to the water supply system.
Instructions for connecting the Aquapoint to the electricity supply.
Overview of the control panel and basic operation.
General| Brand | Zip |
|---|---|
| Model | Aquapoint AP4100S SmartEco |
| Category | Water Heater |
| Language | English |
To Next Page