Do you have a question about the Zip InLine CEX-U and is the answer not in the manual?
Type | Tankless Electric Water Heater |
---|---|
Voltage | 240 V |
Power Supply | Single Phase |
Minimum Wire Size | 6 AWG |
IP Rating | IP25 |
Protection Rating | Class I |
Control Type | Electronic |
Water Pressure | 150 PSI |
Maximum Water Temperature | 50°C |
Critical warnings regarding installation, operation, and user safety.
Specific installation guidelines for pressureless systems.
Important precautions and operational advice for the appliance.
Regulations and standards for proper appliance installation.
Guidelines for selecting an appropriate and safe installation location.
Step-by-step instructions for physically mounting the unit to the wall.
Connecting water pipes and initial purging of air from the system.
Procedures and safety requirements for connecting the appliance electrically.
Requirements for permanent connection, wiring, and earthing.
Detailed steps and diagrams for making the electrical connection.
Process for selecting and setting the appliance's power rating.
Procedure for recommissioning or changing power rating.
Specific settings for shower applications, including temperature limits.
Managing appliance lock levels for restricted operation.
Explanation of error codes and diagnostic message display.
Details on setting lock levels for restricting appliance operation.
How to adjust and set the desired water temperature.
Using preset buttons for quick temperature selection.
Activating and deactivating the optional temperature limiting function.
Procedure to restore all appliance settings to factory defaults.
Tips and methods for efficient energy usage.
Understanding and using the appliance's energy-saving mode.
How the appliance indicates and manages power limitations.
How the unit functions when used with preheated water sources.
Instructions for cleaning the appliance surfaces and fittings.
Steps to purge air from the appliance after maintenance.