To Next PageTo Next Page
Need help?Do you have a question about the Zip InLine ES3 and is the answer not in the manual?
General| Model | ES3 |
|---|---|
| Power Rating | 3 kW |
| Voltage | 230 V |
| Amperage | 13 A |
| Water Connection | 1/2" BSP |
| Approvals | CE, WRAS |
| Temperature Rise | Up to 35°C |
| Weight | 1.2 kg |
| IP Rating | IP24 |
| Product Type | Electric Tankless Water Heater |
| Minimum Water Pressure | 100 kPa |
Potentially hazardous situations that could result in death, serious injury, or property damage.
Potentially hazardous situations that could result in property damage.
Product compliance with LVD, EMC directives, and UK Water Regulations.
Essential prerequisites and compliance for installation.
Guidelines for selecting a suitable location for the appliance.
Specific considerations when connecting to a shower.
Steps to securely mount the appliance onto its wall bracket.
Details on connecting water inlet and outlet pipes.
Illustrations of open vented and unvented installation setups.
Schematic representation of the appliance's electrical components.
Procedure to remove air from the water heater before first use.
Instructions for accessing internal components by removing the cover.
Steps to reattach the appliance cover after maintenance.
Guidance for setting water temperature and flow rates.
Troubleshooting and adjustment for insufficient hot water temperature.
Procedures for cleaning plastic surfaces and outlet fittings.
Explanation of status indicators and their meanings.
