806835 v1.00 12.20 G5 User guide
23
SECTION 3: Command Centre Screen
Boiling calibration
Take care during boiling calibration as hot
steam may vent from the tap spout.
On start-up, the HydroTap self-calibrates, or
go to this menu to recalibrate.
Calibration will take around 10 minutes.
!
External Booster
For selected commercial Boiling models, an external
booster is supplied or may be purchased as an upgrade to
increase Boiling capacity.
Ensure the correct selection is made, for optimum
performance.
To Next Page
Loading...
