Zip HydroTap G5 Touch-Free Wave - CO₂ Settings: Purge, Reset, and Life

806835 v1.00 12.20 G5 User guide
24
CO purge
Purge the gas lines when fitting a new CO gas cylinder.
Press the green start icon. The purge runs for 30 seconds.
Water may be dispensed before CO gas escapes from the
tap. The purge process stops automatically.
3.5.3 CO settings
12:12 PMPURGE WATER WITH CO2
INFO
This process removes water from the sparkling
chamber when a new CO2 bottle is installed.
This is an automatic process that will take 30 seconds.
SECTION 3: Command Centre Screen
CO2 SETTINGS 12:12 PM
CO2
Reset
CO2
Life
Purge
CO2
After fitting a new CO cylinder, reset the CO counter.
CO reset