Zip HydroTap User Manual

Zip HydroTap
Filtered boiling and chilled drinking water for kitchens and tea rooms.
®
Installation and Operating Instructions
81467 - April 2006
This Installation Instruction covers the following HydroTap models:
BC series, B series, HT series and their associated Disabled models.

Zip HydroTap Specifications

General

Model	HydroTap
Water Options	Boiling, chilled, filtered, sparkling
Finish Options	Chrome, brushed chrome, matte black
Power Supply	220-240V, 50Hz
Safety Features	Child safety lock, auto shut-off
Energy Efficiency	Energy-saving mode, insulated tank
Filtration	Integrated filter system to remove chlorine, taste, odor, lead, and other impurities
Installation	Under-sink installation, professional installation recommended
Material	Brass, stainless steel
Warranty	Typically 2 years standard warranty, with extended warranty options available.

Summary

Read These Warnings First

Safety, Refrigerant, and Qualifications

Covers general safety, refrigerant, and installer qualifications.

Venting, Lifting, and Airflow

Filter Control

Installation Requirements

Frost Protection and Environment

Model Identification

Identifies the specific HydroTap models covered by this manual.

Site Preparation

Requirements for cupboard space, water, and power supply connections.

Installation Procedure

Step A - Installing the Tap

Step B - Installing the Undersink Unit

Step C - Connecting the Tap

Step D - Connecting Water Supply

Step E - Testing and Commissioning

Procedures for testing and initial setup of the unit.

Operating the Tap

Tap Lever Operation

Child Safety Lock Features

Activating and deactivating the child safety lock feature.

Replacing the Filter

Setting the Energy Saver Timer

Energy Saving Modes

Boiling Water Isolation Safety

Dispensing Time Settings

Troubleshooting

Power and Water Flow Issues

Diagnosing and resolving power, tap, or water flow problems.

Water Temperature and Recovery Issues