807114 v1.00 12.20 AIO Mains Install Instructions
6
Connect the water supply
See
4
Blue marked braided
hose to mixer tap
All fittings are supplied apart from the isolation
valve.
2x male adaptor
T-piece
Valves and fittings
must be sealed
with PTFE tape.
See
4
Red marked
braided hose to
mixer tap
Mains water
isolation valve
(not supplied)
Hot water isolation valve
(not supplied)
Command Centre connections
Mains In Mains potable water supply.
USB Connected to the Tap.
Boiling out Red silicone tube from tap. Cut to length.
Chilled out
(BC) Blue silicone tube from tap,
(BCS ) Blue JG pipe from tap. Cut to length.
Vent Clear silicone tube from tap. Cut to length.
Sparkling out White JG pipe from tap. Cut to length.
8
7
Connect fittings together
Zip
HydroTap
Installation instructions
Classic / Classic Plus All-in-One Mains Mixer
BC, BCS
Cleaning and general maintenance
Wipe surfaces with a damp cloth and then wipe dry
with a clean, dry cloth. Do not use strong, corrosive or
abrasive cleaning materials.
Visit our website to download the manuals
Australia UK
Zip Water (Aust) Pty Ltd
ABN 46 000 578 727
67 - 77 Allingham Street, Condell Park, NSW 2200
Postal: Locked Bag 80, Bankstown 1885, Australia
(+612) 9796 3100 | Free Call (Aust): 1800 947 827
www.zipwater.com
Zip Water UK
Trafalgar House
Rash’s Green, Dereham,
Norfolk NR19 1JG
0345 6 005 005 | sales@zipindustries.co.uk
specify.zipwater.co.uk
WMK25927
AS/NZS 3718
Braided hose to
Command Centre
MAINS inlet (supplied
with Command Centre)
1/2” BSP adaptor
Strainer
To Next Page
Need help?
General
