To Next Page
S
Susan KochSep 16, 2025
What does steam sensor open mean for Zip HydroTap G5 Water System?
- JJoshua WaltonSep 16, 2025
Steam sensor open indicates an internal fault. Call Zip Service.
What does steam sensor open mean for Zip HydroTap G5 Water System?
Steam sensor open indicates an internal fault. Call Zip Service.
Why has the water supply failed in my Zip HydroTap G5?
The water supply might have failed because the water supply is turned off. Check that the water supply is turned on.
How to fix a power board fault in my Zip HydroTap G5?
A power board fault may be due to an electrical disruption. You should check the power supply and all fuses.
What to do if the hot tank is under filled in my Zip HydroTap G5?
If the hot tank is underfilled, the cause may be low water pressure. Check the water supply.
What does steam sensor closed mean for Zip HydroTap G5?
Steam sensor closed indicates an internal fault. Call Zip Service.
What does flash mem corrupted mean for Zip Water System?
Flash Mem corrupted indicates an internal fault. Call Zip Service.
What does condenser sensor closed mean for Zip Water System?
Condenser sensor closed indicates an internal fault. Check ventilation or call Zip Service.
What does condenser sensor open mean for Zip Water System?
Condenser sensor open indicates an internal fault. Check ventilation or call Zip service.
What does a level board fault mean on my Zip HydroTap G5?
A level board fault indicates an internal fault. Call Zip Service.
What to do if UV is Not Present in my Zip HydroTap G5 Water System?
If UV is not present, check that the UV-C Module USB cable is correctly plugged into the HydroTap.
Explains the meaning of warning and information symbols used in the manual.
Provides essential preliminary instructions and precautions before operating the unit.
Details how to operate the Classic model HydroTap, including controls and lights.
Explains the operation of the Touch-Free Wave model, including sensors and dispense options.
Describes the controls and operation for HydroTap Mixer taps.
Guide on using the Command Centre's touch screen interface for system interaction.
Explains the status screens displayed on the HydroTap home screen.
Details how to navigate through the main menu options for settings and features.
Configuration options for general system parameters like language and date/time.
Access to various system configurations including filter, temperature, and dispense settings.
Features and settings related to system safety and access security.
Options for configuring energy saving modes like sleep and timers.
Step-by-step guide for replacing the internal water filter cartridge.
Instructions for cleaning and maintaining the air inlet filter.
Guidelines for cleaning the external surfaces and specific tap types.
Procedure for replacing the UV-C module and associated hose.
Instructions for replacing the safety solenoid, recommended for qualified personnel.
Guidance on replacing the chilled water hose and tap tube.
Overview of the in-field sanitisation process and required equipment.
Steps for preparing the system and connecting the sanitisation kit components.
Procedures for sanitising the system, testing, and flushing.
General| Model | HydroTap G5 |
|---|---|
| Category | Water System |
| Filtered Water | Yes |
| Energy Efficiency | Highly efficient with Power-Pulse technology |
| Filtration | 0.2 micron filtration system |
| Touchscreen Control | Yes |
| Touch-Free Wave Sensor | Optional |
| Finish Options | Chrome, Matte Black, Brushed Nickel, Rose Gold |
| Product Type | Boiling, Chilled, Filtered Water System |
| Water Options | Boiling, Chilled |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Power Supply | 220-240V |
