807041 v1.00 03.21 HydroTap G5 UltraCare User guide
34
SECTION 4: User maintenance
4.3 Cleaning
!
Wipe external surfaces with a damp cloth or
antibacterial alcohol wipe, then immediately
wipe dry with a clean, dry cloth or paper towel.
Food-grade disinfection wipes may be used to
clean around and within the tap spout.
Do not use strong, corrosive, spray or abrasive
cleaning materials.
For the Touch-Free Wave Tap:
Do not use strong, corrosive, spray or abrasive
cleaning materials to clean the sensor lenses at
the sides, top and rear of the Touch-Free Wave
Tap.
This could cause permanent malfunction and
void warranty.
Do not use self-drying disinfectant sprays.
Dried cleaning fluid may affect function of the
sensors.
To Next Page
Loading...
