807041 v1.00 03.21 HydroTap G5 UltraCare User guide
20
Boiling models
Default set point: 98ºC Set point range: 68-100ºC.
Operation: Within 1-2ºC of set point.
Note: Boiling water delivery rate will be affected with a
higher temperature setting. Up to 6% less energy in standby
is consumed with a 98ºC set point, rather than 100ºC.
A warning icon will appear when setting boiling set point
temperatures that are subject to pump cavitation.
COLD/HOT SETPOINT 12:12 PM
Boiling Set Point
Chill Set Point
5-9
°C
98
°C
Boiling / Chilled set point
Adjust as required.
3.5.2 Temperature settings
SECTION 3: Command Centre Screen
Chilled models
Default chill set point: 5-9ºC (Commercial).
Scroll to select alternatives.
To Next Page
Loading...
