807041 v1.00 03.21 HydroTap G5 UltraCare User guide
27
SLEEP WHEN 12:12 PM
It gets
dark
Not used
in 2 hours
3.7 Energy saving
3.7.1 Sleep mode
• Disabled (default).
• Enabled: Any attempt to dispense water will bring the
HydroTap out of sleep mode. Allow sufficient time for
the water to reach the set temperature.
Sleep when...
Select from: It gets dark / Not used in 2 hours / Both
Recalibrate the light sensor after selecting sleep when “it
gets dark”. Ensure the ambient light is typical for operating
conditions (see page 22).
SECTION 3: Command Centre Screen
To Next Page
Loading...
