20 806393 v1.08 09.19 Micro Install Instructions
Warning: If the Micro is inactive
for longer than 2-3 days, run the
15-second continuous flow at least
four times before consumption.
2
Rinse off with tap water.
Gently dry with cloth/towel.
Maintenance
Air inlet filter (Boiling/Chilled model)
The air inlet filter screen should be inspected at least every three months,
cleaned and replaced if damaged.
1
Note
:
For best performance the
unit should only be operated
with a clean air inlet filter
screen, correctly fitted in place.
Maintain at least a 50mm air
gap in front of the screen at all
times. Take care not to allow
cloths or other soft materials to
accidentally block the air inlet.
3
Slide to remove the air inlet
filter screen
Re-fit the air inlet filter screen
!
To Next Page
Loading...