Zipato Zipabox - MOUNT ANTENNA; POWER UP AND LED SEQUENCE

MOUNT ANTENNA
Screw Z-wave antenna to Antenna 1 connector
POWER UP
Plug the power adaptor into mains supply wall socket and the other end into control
unit. You should see following LED sequence:
01 | PLUG IN POWER ADAPTOR: steady yellow light for approximately 60 sec.
02 | ZIPABOX GETTING READY: slowly fl ashing green light
03 | ZIPABOX READY: steady green light
01
Button
1
02
Button
2
03
LED
indicator
01 02 03
15
ZIPABOX
QUICK INSTALLATION GUIDE14
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.comwww.zipato.com