05 | Keep holding Button2 for 5 seconds (and then release it).
06 | Then observe your LED sequence. If everything goes alright at the end there
should be fixed green light from LED.
If this won’t work it is obviously a hardware problem. In that case you should return
your box to your supplier and take the new one...
I have placed a device outside my house and it is not communicating with the
Zipabox. What’s happening?
If you have a lot of metal in the exterior construction of your home, this could
significantly impede wireless communication. Metal is an insulator of radio signals. If
your house has metal siding or a stucco finish over a metal mesh, you may have range
problems on devices outside your home communicating with the Zipabox inside.
What should I do if I am having trouble installing my device?
If you are having difficulty with the physical installation of non-Zipato branded
devices (Thermostats, GE switches, Blueline meter reader, etc.), please contact the
manufacturer directly for assistance.
If you are having trouble pairing a device to the Zipabox, check the videos or other
content on Zipato website for assistance.
Error “Validation time expired”
Serial number must be entered within 2 min. If not, message will appear saying
“Allowed registration time elapsed”. This is done because security precaution. Allowed
23
ZIPABOX
QUICK INSTALLATION GUIDE22
ZIPABOX
QUICK INSTALLATION GUIDE
www.zipato.comwww.zipato.com
To Next Page
Loading...
