14
13
14
ZIPFORCE WITH BICYCLE LIGHT
LOCK THE ZIPFORCE
If you have a bicycle light where the supports for the
motor bracket are mounted, you can use the included
tting made especially for bicycle lights.
1. Bend the special tting to the right or left,
depending on which side you want to attach the
bicycle light to.
2. Screw the special bracket into the holes on the
motor bracket where the bracket screws
are located.
3. Fix the bicycle light to the hole with the
supplied screw.
1. Clip the Zipforce into the motor bracket.
2. Insert a padlock through the two holes in the
motor bracket lever.
3. Now it is not possible to remove the Zipforce from
the motor bracket. Perfect if you are going to
leave the Zipforce for a short while.
To Next Page
Loading...