Zippity OCEANSIDE - Step 2: Installing Mounting Accessories

WWW.ZIPPITY-OUTDOOR.COM
4
ASSEMBLY INSTRUCTIONS
ZP19024
NOT INCLUDED WITH PURCHASE:
Sold Separately
For wood or concrete
surface mounng
For in-ground mounng Only needed if installed
on concrete
Only needed if installed
on wood
Only needed if installed
in ground
Sold Separately
(ZP19011) Zippity
Surface Mount
2-pack (2)
(ZP19012)
Zippity Post
Extension (1)
¼” x 3” Concrete
Wedge Anchor (16)
¼” x 4” Hex Head
Bolt w/ Nut and
Washer (16)
80 lb Concrete
Mix (2)
STEP 2: INSTALLING MOUNTING ACCESSORIES
Concrete or wood surface mounng: Insert (4) Surface Mounts
(ZP19011)
Mounts will be secured in the next step.
In-ground installaon: Insert (4) Post Extensions (ZP19012) into

secured in the next step.
STEP 2.1A
STEP 2.1B