Zippity ZP19041 User Manual

Check Box for These Contents
In the event of missing or defective parts please call our customer service department at 1 877 234 6196 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1
. Post Cap (1)
2. Picket 1 ( 2) - 3/8” x 2 3/4“ x 36 1/2”
Picket 2 ( 2) - 3/8” x 2 3/4“ x 34 3/8”
Picket 3 ( 2) - 3/8” x 2 3/4“ x 32 3/4”
Picket 4 ( 2) - 3/8” x 2 3/4“ x 31 1/2”
Picket 5 ( 2) - 3/8” x 2 3/4“ x 30 3/4”
Picket 6 ( 2) - 3/8” x 2 3/4“ x 30 1/2”
3. Post (1) - 2“ x 3 1/2” x 44 5/8“
4. Rail Brackets (4)
5. Top Rail (1) - 1 1/2” x 3 1/2“ x 68 1/4”
6. Anchor Pipe (1) - 44 7/8”
7. Bottom Rail (1) - 1 1/2” x 3 1/2“ x 68 1/4”
8. 1” Self-Augering Hex Head Steel Screws (2)
9. 3/4” Self-Augering Stainless Steel Screws (24)
10. 1/8“ Hardened Steel Drill Bit (1)
Sold Separately:
 All American Vinyl Fence Finishing Post (42” High)
with No-Dig Steel Pipe Anchor Kit
Tools You Will Need
• Cordless Drill
• Level
All American Vinyl Picket Fence
with No-Dig Steel Pipe Anchor Kit
(42” H x 72” W)
Please read through before starting assembly.
ASSEMBLY GUIDE
1
8
Not to Scale
IMPORTANT: CHECK THE INSIDE OF THE LARGER PIECES IN YOUR BOX FOR OTHER MATERIALS
PACKED INSIDE.
Ver 1.0/050219
1
5
2
3
6
9
7
Ground
4
2”x3½” Fence Run Finishing Post with Cap and
No-Dig Steel Pipe Anchor Kit Sold Separately
This fence can easily be trimmed
down horizontally to fit your custom
space. Use a fine toothed circular
saw or hack saw.
10
70 3/8 in
72 in
68 1/2 in
18 1/8 in
23 in
21 3/4 in
38 5/8 in
42 in
4 in
2 in
6 in
2 3/4 in

Zippity ZP19041 Specifications

General

Brand	Zippity
Model	ZP19041
Category	Fencing & Gates
Language	English

Summary

Install Anchor Pipes

Tool Options for Driving Pipe

Overview of recommended tools for driving anchor pipes into the ground.

Anchor Pipe Installation Guide

Step-by-step instructions for driving anchor pipes to correct depth and alignment.

Install Post over Anchor Pipe

Ground Preparation for Post Installation

Optional method to loosen soil for easier post insertion into hard ground.

Securing Post to Anchor Pipe

Instructions on orienting and securing the vinyl post onto the anchor pipe.

Install Fence Panel

Attach Bottom Rail Bracket

Install the bracket for the bottom rail onto the installed vinyl post.

Connect Bottom Rail

Slide the bottom rail into the bracket and ensure proper height.

Install Top Brackets and Rails

Install top brackets, then slide top rails into place and secure them.

Install Pickets & Post Caps

Picket Installation

Insert pickets through the top rail and lock them into the bottom rail.

Post Cap Installation

Press post caps onto the vinyl posts to secure them.

Tips for Installation

Planning and Measurement

Emphasizes careful planning and measuring as moving pipes is difficult.

Working with Uneven Terrain

Guidance on how to install fence panels on sloped or uneven ground.

Avoid These Pitfalls

Contacting Local Utilities

Reminder to call utilities before installation to avoid underground hazards.

Checking Zoning Laws

Importance of checking local regulations and permit requirements.

Property Line Verification

Ensuring correct fence placement to avoid property line disputes.

Neighbor Communication

Advice on talking to neighbors about fence installation and potential cost sharing.

Handling Unstable Ground

Methods for installing posts in rock or unstable ground conditions.