SETTING COUNTDOWN VALUES
• Press the MODE button repeatedly to select the parameter you want to base your training
on: time, distance, calories, or the upper heart rate value.
(The display should show only the parameter, without the SCAN option.)
• Press SET multiple times to set the value.
• The countdown starts when you start pedalling. A down arrow will be displayed on the screen.
• When the countdown is over, or you reach the set heart rate value, the device makes a
sound.
PULSE RATE
• Press MODE until the display shows PULSE.
• Put both your hands on the heart rate sensors on the handlebar. During the measurement,
the computer displays a heart icon.
• The computer displays the current heart rate after three to four seconds.
ATTENTION! The results are approximated and must not be used for any medical purposes.
AUTO ON/OFF
The computer is switched on when the flywheel moves or any button is pressed.
The computer is switched off after four minutes of inactivity.
POWER SUPPLY
2 AAA or UM4 batteries
Operating temperature 0°C to +40°C (32°F – 104°F)
Storage temperature: -10°C to +60°C (14°F – 140°F)
Computer (model): MRSM03-ORG
To Next Page
Loading...
Need help?
General
