Oxygen Monitor SGM7 8 Operation
HB_SGM7_eng.docx 24
8.2.2 Programming menus
The keys below the display refer to the following menus (the current meaning
of the respective key is shown on the display). A definite parameter can be
chosen, changed and finally confirmed with the
-key.
A Main display
OXYGEN:
Flow rate
20.64vol%
WARM UP
Status line
PUMP OFF 650°C
Pump state (on/off by key) and cell temperature
The following status can be visualised by LED:
red flashing: Error
green: OK
yellow: Limit value
B Settings
SETTINGS
GENERAL
LIMIT
ANALOG OUTPUT
CALIBRATION
RETURN
B.1 General settings
GENERAL SETTINGS
LANGUAGE: ENGLISH
English, Deutsch
BAUD RATE: 9600
4800,9600,19200
CONTRAST: 0
+- 9
BEEP: ON
OFF
RETURN
To Next Page
