Need help?Do you have a question about the ZKTeco G3 Pro and is the answer not in the manual?
General| Type | Basic access control reader |
|---|---|
| Log capacity | 100000 |
| Product color | White |
| Cards capacity | 2000 cards |
| Number of users | 2000 user(s) |
| Fingerprint reader | Yes |
| Authentication type | Access chip/card, Biometric, Face recognition |
| Access chip/card reader | - |
| Verification (1:1) time | 1 s |
| PC connection | USB 2.0 |
| Ethernet LAN (RJ-45) ports | 1 |
| DC current (max) | 1.5 A |
| DC voltage range | 12 - 12 V |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 171.8 mm |
|---|---|
| Width | 199.2 mm |
| Height | 96.9 mm |
Instructions for correct standing position, facial expression, palm, and fingerprint enrollment.
Procedures for adding new users and modifying existing user details.
Setting up IP addresses, Wi-Fi networks, and related parameters.
Adjusting settings for attendance logging, photos, and biometric recognition thresholds.
Procedures for factory reset and firmware updates.
Procedures for deleting attendance and user data, and backing up device information.
Setting lock delays, sensors, alarms, and valid access time periods.
Configuring holiday access, user groups, combined verification, and duress alarms.
To Next Page