ZKTeco ML10 Series User Manual

Page | 8
Lock Initialization
Method 1 Method 2
Press the "Reset" button with
a pin
Press the sensor holder to
power up the lock
Loosen the pin
Press the button in order "+",
"1", "2", "3" , "-"
Initialize succeeded
One beep for each
press, the back LED
blinks green
Green light blinks
A long beep, LED blinks
green for 1 second
Note: The lock will be restored to factory defaults settings after initialization, and the door can be opened with
any fingerprint or ID card.
Operating Steps
Indication Operating Steps
Delete all normal users
Delete all administrators
Reset succeeded
Delete all temporary users
Please refer “Delet
Normal User”
Please refer “Delet
Administrator”
Please refer “Delet
Temporary User”

ZKTeco ML10 Series Specifications

General

Brand	ZKTeco
Model	ML10 Series
Category	Door locks
Language	English