6
(1)If a registered user verified, the device will export the signal to unlock the
door.
(2)Door sensor will detect the on-off state.
(3) External exit button is supported; it is convenient to open the door inside.
(4)
E
xternal card reader is supported.
(5) Connect the USB port of the integrated machine to the USB port of the
computer to set the working parameters of the integrated machine.
(6)
Su
pports TCP/IP modes to connect with PC.
5. Lock Connection
1) Shares power with the lock:
U
LOCK
=12V, I ≥ I
Device
+ I
Lock
(The maximum operating current of device is 100mA,
and the rated current is 60mA); and the lock is near to the device.
2) D
oes not share power with the lock:
When U
LOCK
=12V, I < I
Device
+ I
Lock
(The maximum operating current of device is
100mA, and the rated current is 60mA);
When U
LOCK
≠12V;
When the lock is far from the device.
To Next Page
Loading...
Need help?
General
